Shop
Showing 1–12 of 171 results
-
-
Flood Lighting, LED Floodlights, Uncategorised
SENA50C LED FLOODLIGHT
LED Floodlight – 50 Watt External Lighting. Ideal as garden floodlight or for security, commercial or domestic lighting. With a bright lumen output and low glare, this floodlight is highly efficient with an LED Epistar chip SMD5730. With energy savings of 85% and low maintenance costs the SENA-50C has a long life of over 35,000 hours. Prewired with only 250mm of flex an IP rated box or connector will be required.
SKU: 1 -
Flood Lighting, LED Floodlights
CR Blade2 LED Floodlight 100 Watt
Blade 100 watt LED floodlight IP65 rated, 14000 Lumens, 5000k, Beam angle 120 degrees, weight 4kg and dimensions 315mm x 245mm x 57mm.
Suitable for lighting in commercial, sports, car parks and public spaces.Warranty: 5 Years Warranty
Delivery: 3 to 5 Working Days
SKU: 2 -
Accessories, Electrical Accessories
CR L2/SF/A2 With Double Insulated Tails & Earth
Single fuse carrier for BS88 fuse and double pole isolation switch complete with plastic base plate with rubber grommet and 6mm double insulated tails and 6mm Earth wire, complete with 1 no MD 6amp fuses. The Isolator range offers DP switch protection with safety interlock and lockable cover for added security. The Cut Out range features a secure and quick release carrier to provide safe and easy access to fuses and outgoing terminals.
SKU: n/a -
Accessories, Electrical Accessories
CR L3/S2F/K3 With Double Insulated Tails & Earth
Double fuse carrier for BS88 fuse and double pole isolation switch complete with plastic base plate with rubber grommet and 6mm double insulated tails and 6mm Earth wire, complete with 2 no MD 6amp fuses. The Isolator range offers DP switch protection with safety interlock and lockable cover for added security. The Cut Out range features a secure and quick release carrier to provide safe and easy access to fuses and outgoing terminals.
SKU: n/a -
Floodlight Brackets, Floodlight Brackets, Street Lighting Brackets, Uncategorised
Corner Wall Mounted Galvanised Flood Light Bracket CRF / CWB-1
Floodlight Brackets, Floodlight Brackets, Street Lighting Brackets, UncategorisedCorner Wall Mounted Galvanised Flood Light Bracket CRF / CWB-1
Galvanised Corner wall mounted bracket with 300mm projection, with flat angled plate with 4 No M10 fixing holes to enable fixing, also rear hole for cable access from behind if required and M14 Hole for fixing flood light stirrup.
SKU: n/a -
-
LED Street Lighting, Street Lighting
E 950 LANTERN 16 WATT LED 34MM TO 42MM SIDE ENTRY & UNIVERSAL 76MM POST TOP BRACKET
LED Street Lighting, Street LightingE 950 LANTERN 16 WATT LED 34MM TO 42MM SIDE ENTRY & UNIVERSAL 76MM POST TOP BRACKET
The E 950 is a high quality, low cost solution to replace existing sodium discharge lighting and compact fluorescent luminaires on minor roads and housing estates. This lantern is manufactured with a high pressure die cast aluminium housing on the top half and a polycarbonate housing on the bottom, with the body colour Light Grey RAL 7035 Polyester powder coat on top, it is fitted with a 7 pin nema socket and comes pre-wired with 7.25m of 1.5 3 core flex. The lantern has an Ingress Protection of IP66. The Lantern is side entry mounting 34mm to 42mm and comes with 76mm Universal post top mounting bracket, with 28 LEDs, the driver will run at 600mA running at 16 watts at 2217 lumens 4000K.
The E950 is Dark Sky Friendly (no upward light) and is 100% recyclable.
Delivery: 3-5 working days
SKU: n/a -
LED Street Lighting, Street Lighting, Uncategorised
E 950 LANTERN 39 WATT LED 34MM – 42MM SIDE ENTRY & UNIVERSAL 76MM POST TOP BRACKET
LED Street Lighting, Street Lighting, UncategorisedE 950 LANTERN 39 WATT LED 34MM – 42MM SIDE ENTRY & UNIVERSAL 76MM POST TOP BRACKET
The E 950 is a high quality, low cost solution to replace existing sodium discharge lighting and compact fluorescent luminaires on minor roads and housing estates. This lantern is manufactured with a high pressure die cast aluminium housing on the top half and a polycarbonate housing on the bottom, with the body colour Light Grey RAL 7035 Polyester powder coat on top, it is fitted with a 7 pin nema socket and comes pre-wired with 10.25m of 1.5 3 core flex. The lantern has an Ingress Protection of IP66. The Lantern is side entry mounting 34mm to 42mm and comes with 76mm Universal post top mounting bracket, with 28 LEDs, the driver will run at 950mA running at 39 watts and 6086 lumens at 4000K.
The E950 is Dark Sky Friendly (no upward light) and is 100% recyclable.
As this lantern has a Nema Socket you will require a Dusk till Dawn Photocell or a Shorting plug for Group Control Circuits for the Lantern to work.
Delivery: 3-5 working days
SKU: n/a
