Uncategorised
Showing 1–12 of 15 results
-
-
Street Furniture, Traffic Sign Lights, Uncategorised
Give Way Sign Diagram 602 600mm
Product Detail
Decription : Sign Plate Diagram 602 GIVE WAY
Material : Dibond substrate
Plate Size : 600mm,
Plate Finish ; CR2 Reflective
All signs are plate only or come with channel
Fully compliant with BSEN 12899:2007SKU: n/a -
Electrical Accessories, Feeder Pillars, Uncategorised
Lattice Earth Mat 600mm x 600mm x 3mm
Lattice copper earth plates are usually used in situations where its very difficult to knock earth rods into the ground. The plates are usually placed a meter in the ground and because of the surface area will usually generate good readings.
SKU: n/a -
Flood Lighting, LED Floodlights, Uncategorised
SENA50C LED FLOODLIGHT
LED Floodlight – 50 Watt External Lighting. Ideal as garden floodlight or for security, commercial or domestic lighting. With a bright lumen output and low glare, this floodlight is highly efficient with an LED Epistar chip SMD5730. With energy savings of 85% and low maintenance costs the SENA-50C has a long life of over 35,000 hours. Prewired with only 250mm of flex an IP rated box or connector will be required.
SKU: 1 -
Floodlight Brackets, Floodlight Brackets, Street Lighting Brackets, Uncategorised
Corner Wall Mounted Galvanised Flood Light Bracket CRF / CWB-1
Floodlight Brackets, Floodlight Brackets, Street Lighting Brackets, UncategorisedCorner Wall Mounted Galvanised Flood Light Bracket CRF / CWB-1
Galvanised Corner wall mounted bracket with 300mm projection, with flat angled plate with 4 No M10 fixing holes to enable fixing, also rear hole for cable access from behind if required and M14 Hole for fixing flood light stirrup.
SKU: n/a -
-
LED Street Lighting, Street Lighting, Uncategorised
E 950 LANTERN 39 WATT LED 34MM – 42MM SIDE ENTRY & UNIVERSAL 76MM POST TOP BRACKET
LED Street Lighting, Street Lighting, UncategorisedE 950 LANTERN 39 WATT LED 34MM – 42MM SIDE ENTRY & UNIVERSAL 76MM POST TOP BRACKET
The E 950 is a high quality, low cost solution to replace existing sodium discharge lighting and compact fluorescent luminaires on minor roads and housing estates. This lantern is manufactured with a high pressure die cast aluminium housing on the top half and a polycarbonate housing on the bottom, with the body colour Light Grey RAL 7035 Polyester powder coat on top, it is fitted with a 7 pin nema socket and comes pre-wired with 10.25m of 1.5 3 core flex. The lantern has an Ingress Protection of IP66. The Lantern is side entry mounting 34mm to 42mm and comes with 76mm Universal post top mounting bracket, with 28 LEDs, the driver will run at 950mA running at 39 watts and 6086 lumens at 4000K.
The E950 is Dark Sky Friendly (no upward light) and is 100% recyclable.
As this lantern has a Nema Socket you will require a Dusk till Dawn Photocell or a Shorting plug for Group Control Circuits for the Lantern to work.
Delivery: 3-5 working days
SKU: n/a -
Street Lighting, Street Lighting Accessories, Street Lighting Columns, Uncategorised
Lamp Column Protector Root Mounted
Street Lighting, Street Lighting Accessories, Street Lighting Columns, UncategorisedLamp Column Protector Root Mounted
The column guard is designed to protect columns from impact damage from most directions whilst allowing easy access to the column door. Ideal for use in car parks, busy roadsides and any columns which may be at risk of collision.
This Lamp Column Protector is root mounted and galvanized finish.
Features:
- Enhanced Column Protection
- Manufactured from S235JR grade mild steel
- Galvanised to BS EN ISO 1461:2009
SKU: n/a -
Floodlight Brackets, Street Lighting Brackets, Uncategorised
Single Wall Mounted Galvanised Flood Light Bracket CRF / FLWB-1
Floodlight Brackets, Street Lighting Brackets, UncategorisedSingle Wall Mounted Galvanised Flood Light Bracket CRF / FLWB-1
Galvanised wall mounted bracket with 300mm projection, with 150mm x 150mm flat plate with 4 No M10 fixing holes, also rear hole for cable access from behind if required and M14 Hole for fixing flood light stirrup.
SKU: n/a -
Pedestrian Crossing Posts, Street Furniture, Uncategorised
Belisha Beacon AVG4 HALO Package
This Belisha Beacon AVG4 HALO Package is made up of the new AVG 4 Anti Vandal Gallery, LED Polestar Light Engine new AVG4 Amber Globe with its new twist and locking mechanism and screws to secure in place, this unit also comes pre-wired with 4 m of flex.
Designed to meet TSRG&D, the AVG4 Halo is constructed from high-quality cast aluminium, utilising 153 LEDs on each side ensuring high visibility for all road users and pedestrians.
Please note Pedestrian Crossing Post is not Included.
Delivery: 7-10 Working Days
SKU: n/a
